Furnish
and install 3D CableGrid Ceiling System (#CG-24, #CG-30, #CG-36,
#CG-48, and #CG-60) manufactured by Ceiling Designs Inc.,
and represented by (name, city and phone number of CDI sales
representative) in all locations shown where indicated on
the plans.
Finishes:
Tubes and Hubs shall be in Standard White. Hub hardware shall
be in Standard (Cadmium, Natural Brass). Custom
Finishes: Custom finishes are available upon request.
|
Hanging
System: Each Hub of the top layer shall be supported from
the structure above by means of (#12 Pre-straightened Steel
Hanger Wire secured to #CG-BL Loop using three tight wrappings)
or (#CG-C16 Stainless Steel Cable attached securely top and
bottom using #CG-SW Swedges (please refer to your CableGrid
Fact Sheet for recommended tools).
|
All hangers shall drop plumb. Where plumb hangers are not possible,
please refer to the manufacturer's Installation Instructions
for directions. |